MBT6410 # print
  

  init_mode=bootp
  

  bootdelay=3
  

  baudrate=115200
  

  ethaddr=00:40:5c:26:63:37
  

  bootfile=mobot_img/system.img
  

  dnsip=192.168.1.2
  

  init_status=1
  

  bootcmd=onenand read 0x50400000 0x700000 0x300000;onenand read 0x50800000 0xa00000 0x200000;bootm 0x50400000 0x50800000
  

  filesize=13e178
  

  fileaddr=50400000
  

  gatewayip=10.10.66.58
  

  netmask=255.255.255.0
  

  ipaddr=10.10.66.135
  

  serverip=10.10.66.109
  

  bootargs=console=ttySAC2,115200 mem=256M
  

  

  Environment size: 413/32764 bytes
  

  MBT6410 # tftp 0x50400000 uImage
  

  smc911x: initializing
  

  smc911x: detected LAN9115 controller
  

  status = 0x782d
  

  smc911x: phy initialized
  

  smc911x: MAC 00:40:5c:26:63:37
  

  TFTP from server 10.10.66.109; our IP address is 10.10.66.135
  

  Filename 'uImage'.
  

  Load address: 0x50400000
  

  Loading: #################################################################
  

  #################################################################
  

  #################################################################
  

  #################################################################
  

  #################################################################
  

  ##############################
  

  done
  

  Bytes transferred = 1816692 (1bb874 hex)
  

  MBT6410 # boot 0x50400000
  

  Unknown command 'boot' - try 'help'
  

  MBT6410 # bootm 0x50400000
  

  ## Booting image at 50400000 ...
  

  Image Name:   Linux-2.6.36
  

  Created:      2012-12-12  14:06:09 UTC
  

  Image Type:   ARM Linux Kernel Image (uncompressed)
  

  Data Size:    1816628 Bytes =  1.7 MB
  

  Load Address: 50008000
  

  Entry Point:  50008000
  

  Verifying Checksum ... OK
  

  OK
  

  

  Starting kernel ...
  

  

  Uncompressing Linux... done, booting the kernel.
  

  Linux version 2.6.36 ([email protected]) (gcc version 4.3.1 (for S3C64XX Samsung Electron2
  

  CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
  

  CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  

  Machine: SMDK6410
  

  Ignoring unrecognised tag 0x54410111
  

  Memory policy: ECC disabled, Data cache writeback
  

  CPU S3C6410 (id 0x36410101)
  

  S3C24XX Clocks, Copyright 2004 Simtec Electronics
  

  camera: no parent clock specified
  

  S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
  

  S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
  

  mout_apll: source is fout_apll (1), rate is 532000000
  

  mout_epll: source is epll (1), rate is 24000000
  

  mout_mpll: source is mpll (1), rate is 532000000
  

  mmc_bus: source is mout_epll (0), rate is 24000000
  

  mmc_bus: source is mout_epll (0), rate is 24000000
  

  mmc_bus: source is mout_epll (0), rate is 24000000
  

  usb-bus-host: source is clk_48m (0), rate is 48000000
  

  uclk1: source is mout_epll (0), rate is 24000000
  

  spi-bus: source is mout_epll (0), rate is 24000000
  

  spi-bus: source is mout_epll (0), rate is 24000000
  

  audio-bus: source is mout_epll (0), rate is 24000000
  

  audio-bus: source is mout_epll (0), rate is 24000000
  

  audio-bus: source is mout_epll (0), rate is 24000000
  

  irda-bus: source is mout_epll (0), rate is 24000000
  

  camera: no parent clock specified
  

  Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
  

  Kernel command line: console=ttySAC2,115200 mem=256M
  

  PID hash table entries: 1024 (order: 0, 4096 bytes)
  

  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  

  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  

  Memory: 256MB = 256MB total
  

  Memory: 256204k/256204k available, 5940k reserved, 0K highmem
  

  Virtual kernel memory layout:
  

  vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  

  fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  

  DMA     : 0xff600000 - 0xffe00000   (   8 MB)
  

  vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
  

  lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  

  modules : 0xbf000000 - 0xc0000000   (  16 MB)
  

  .init : 0xc0008000 - 0xc0025000   ( 116 kB)
  

  .text : 0xc0025000 - 0xc0337000   (3144 kB)
  

  .data : 0xc034e000 - 0xc036fcc0   ( 136 kB)
  

  Hierarchical RCU implementation.
  

  Verbose stalled-CPUs detection is disabled.
  

  NR_IRQS:246
  

  VIC @f4000000: id 0x00041192, vendor 0x41
  

  VIC @f4010000: id 0x00041192, vendor 0x41
  

  Console: colour dummy device 80x30
  

  console [ttySAC2] enabled
  

  Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
  

  pid_max: default: 32768 minimum: 301
  

  Mount-cache hash table entries: 512
  

  CPU: Testing write buffer coherency: ok
  

  NET: Registered protocol family 16
  

  s3c64xx_dma_init: Registering DMA channels
  

  s3c64xx_dma_init1: registering DMA 0 (d0808100)
  

  s3c64xx_dma_init1: registering DMA 1 (d0808120)
  

  s3c64xx_dma_init1: registering DMA 2 (d0808140)
  

  s3c64xx_dma_init1: registering DMA 3 (d0808160)
  

  s3c64xx_dma_init1: registering DMA 4 (d0808180)
  

  s3c64xx_dma_init1: registering DMA 5 (d08081a0)
  

  s3c64xx_dma_init1: registering DMA 6 (d08081c0)
  

  s3c64xx_dma_init1: registering DMA 7 (d08081e0)
  

  PL080: IRQ 73, at d0808000
  

  s3c64xx_dma_init1: registering DMA 8 (d080c100)
  

  s3c64xx_dma_init1: registering DMA 9 (d080c120)
  

  s3c64xx_dma_init1: registering DMA 10 (d080c140)
  

  s3c64xx_dma_init1: registering DMA 11 (d080c160)
  

  s3c64xx_dma_init1: registering DMA 12 (d080c180)
  

  s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
  

  s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
  

  s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
  

  PL080: IRQ 74, at d080c000
  

  S3C6410: Initialising architecture
  

  s3c-adc s3c64xx-adc: attached adc driver
  

  bio: create slab <bio-0> at 0
  

  SCSI subsystem initialized
  

  usbcore: registered new interface driver usbfs
  

  usbcore: registered new interface driver hub
  

  usbcore: registered new device driver usb
  

  s3c-i2c s3c2440-i2c.0: slave address 0x10
  

  s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
  

  s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  

  s3c-i2c s3c2440-i2c.1: slave address 0x10
  

  s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
  

  s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  

  Bluetooth: Core ver 2.15
  

  NET: Registered protocol family 31
  

  Bluetooth: HCI device and connection manager initialized
  

  Bluetooth: HCI socket layer initialized
  

  NetWinder Floating Point Emulator V0.97 (double precision)
  

  NTFS driver 2.1.29 [Flags: R/O].
  

  ROMFS MTD (C) 2007 Red Hat, Inc.
  

  msgmni has been set to 500
  

  io scheduler noop registered
  

  io scheduler deadline registered
  

  io scheduler cfq registered (default)
  

  s3c-fb s3c-fb: window 0: fb
  

  Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  

  s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
  

  s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
  

  s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
  

  s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
  

  brd: module loaded
  

  loop: module loaded
  

  usbcore: registered new interface driver ub
  

  at24 0-0050: 1024 byte 24c08 EEPROM (writable)
  

  at24 1-0057: 16384 byte 24c128 EEPROM (writable)
  

  S3C24XX NAND Driver, (c) 2004 Simtec Electronics
  

  PPP generic driver version 2.4.2
  

  PPP Deflate Compression module registered
  

  PPP BSD Compression module registered
  

  PPP MPPE Compression module registered
  

  NET: Registered protocol family 24
  

  ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  

  s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
  

  s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
  

  s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
  

  s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
  

  ohci_hcd: can't start s3c24xx
  

  s3c2410-ohci s3c2410-ohci: startup error -75
  

  s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
  

  s3c2410-ohci: probe of s3c2410-ohci failed with error -75
  

  mice: PS/2 mouse device common for all mice
  

  S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  

  s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
  

  s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
  

  i2c /dev entries driver
  

  cpuidle: using governor ladder
  

  sdhci: Secure Digital Host Controller Interface driver
  

  sdhci: Copyright(c) Pierre Ossman
  

  s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
  

  s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
  

  s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz)
  

  mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  

  usbcore: registered new interface driver usbhid
  

  usbhid: USB HID core driver
  

  VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  

  s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
  

  s3c-rtc s3c64xx-rtc: hctosys: invalid date/time
  

  VFS: Cannot open root device "(null)" or unknown-block(0,0)
  

  Please append a correct "root=" boot option; here are the available partitions:
  

  Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  

  [<c002b6e4>] (unwind_backtrace+0x0/0xec) from [<c02668cc>] (panic+0x4c/0x178)
  

  [<c02668cc>] (panic+0x4c/0x178) from [<c0009094>] (mount_block_root+0x25c/0x2b4)
  

  [<c0009094>] (mount_block_root+0x25c/0x2b4) from [<c00092bc>] (prepare_namespace+0x164/0x)
  

  [<c00092bc>] (prepare_namespace+0x164/0x1c8) from [<c00085fc>] (kernel_init+0x10c/0x150)
  

  [<c00085fc>] (kernel_init+0x10c/0x150) from [<c0026e4c>] (kernel_thread_exit+0x0/0x8)