(!) DirectFB/Config: Unable to open config file `/etc/directfbrc'!
  

  (*) DirectFB/Config: Active DTV signal edid
  

  (*)em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #0 address 0x9f3fbe34 with refcount 1 > 0 do not free
  

  DirectFB/Configem8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #1 address 0x9f3b9e28 with refcount 1 > 0 do not free
  

  : Active DTV conem8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #2 address 0x9f294e1c with refcount 1 > 0 do not free
  

  nector hdmi
  

  (*)em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #3 address 0x9ef1037c with refcount 1 > 0 do not free
  

  DirectFB/Config: Active Component standard hdtv60
  

  (*) DirectFBir: exclusive access only
  

  /Config: Active Component signal 1080i
  

  (*) DirectFB/Config: Active DTV connector ycrcb
  

  (*) DirectFB/Config: Active Analog standard ntsc
  

  (*) DirectFB/Config: Active Analog signal ntsc
  

  (*) DirectFB/Config: Active Analog connector cvbs
  

  (*) DirectFB/Config: Driver options file /tango/sdk/dcchd_build/sigmadfbrc
  

  (!) DirectFB/Config: Unable to open config file `//.directfbrc'!
  

  (!) DirectFB/Config: Unable to open config file `/etc/directfbrc.textedit'!
  

  (!) DirectFB/Config: Unable to open config file `//.directfbrc.textedit'!
  

  

  =======================|  DirectFB 1.0.0  |=======================
  

  (c) 2001-2007  The DirectFB Organization (directfb.org)
  

  (c) 2000-2004  Convergence (integrated media) GmbH
  

  ------------------------------------------------------------
  

  

  (*) DirectFB/Core: Single Application Core. (2011-06-13)
  

  SYSTEM:ERROR:RUA splash screen clean up error 9
  

  (!) System initialised
  

  (!) DirectFB/em86remote: IR device /dev/ir could not be opened, retry in 1 second
  

  --> Input/output error
  

  (*) Direct/Thread: Running 'EM86 Input' (INPUT, 1088)...
  

  (*) DirectFB/Input: EM86xx remote control 1.0 (SigmaDesigns)
  

  (!) [00:06:17.231] dh_info unavailable for CEC input device!
  

  --> Success
  

  (*) Direct/Thread: Running 'EM86 CEC Input' (INPUT, 1089)...
  

  (*) DirectFB/Input: EM86xx CEC remote commands 1.0 (SigmaDesigns)
  

  (*) Direct/Thread: Running 'EM86 TCP Input' (INPUT, 1090)...
  

  (*) DirectFB/Input: EM86xx remote control over TCP/ 0.1 (SigmaDesigns)
  

  (*) Direct/Thread: Running 'Hotplug with Linux Input' (INPUT, 1091)...
  

  (*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver
  

  

  

  

  

  

   

    *
   
   

    WARNING               WARNING                   WARNING             *
   
   

    *
   
   

    DCCHD logging is disabled!                                             *
   
   

    To enable it define ENABLE_DEV_SUPPORT in the environment.             *
   
   

    *
   
  
  

  

  

  

  

  (!) Driver getting globals=0x4340a8
  

  DCC-HD memory configuration:
  

  DRAM0: 0.0 MB   (Mapped = 0.0 MB,       Unmapped = 0.0 MB)
  

  DRAM1: 8.8 MB   (Mapped = 0.2 MB,       Unmapped = 8.5 MB)
  

  DirectFB: 96.0 MB in DRAM0
  

  DirectFB available to applications: 16
  

  MMAP_DRAM0_SIZE: 128 (30 used by hw/fw/Linux)
  

  MMAP_DRAM1_SIZE: 120 (111 used by hw/fw/Linux)
  

  MMAP_MONO_SIZE: 80 (81920 KB)
  

  MMAP_LINUX_SIZE: 108
  

  MMAP_DRAM0_UNMAPPED_BASE = 0x1, size 0x4 (1 KB)
  

  MMAP_DRAM0_MEMPOOL_UNMAPPED_BASE = 0x2, size 0x2 (1 KB)
  

  MMAP_DRAM0_BASE = 0x5, size 0x4 (1 KB)
  

  MMAP_DRAM0_MEMPOOL_BASE = 0x6, size 0x2 (1 KB)
  

  MMAP_DirectFB_MEM = 0x8, size 0x6000003 (98305 KB)
  

  MMAP_DRAM1_UNMAPPED_BASE = 0x9, size 0x882004 (8713 KB)
  

  MMAP_AUDIO_0_BASE = 0xa, size 0x274000 (2512 KB)
  

  MMAP_AUDIO_0_SHADOW_BASE = 0x27400a, size 0 (0 KB)
  

  MMAP_AUDIO_1_BASE = 0x27400a, size 0x32e000 (3256 KB)
  

  MMAP_JPEG_BASE = 0x5a200a, size 0 (0 KB)
  

  MMAP_AUDIO_1_SHADOW_BASE = 0x5a200a, size 0 (0 KB)
  

  MMAP_DRAM1_MEMPOOL_UNMAPPED_BASE = 0x5a200a, size 0x2e0002 (2945 KB)
  

  MMAP_DEMUX_BASE = 0x5a200b, size 0x2a0000 (2688 KB)
  

  MMAP_MISC_BASE = 0x84200b, size 0x40000 (256 KB)
  

  MMAP_DRAM1_BASE = 0x88200d, size 0x40004 (257 KB)
  

  MMAP_DRAM1_MEMPOOL_BASE = 0x88200e, size 0x40002 (257 KB)
  

  MMAP_DEMUX_OUTPUT_BASE = 0x88200f, size 0x40000 (256 KB)
  

  MMAP_DCCHD_DATA_BASE = 0x88200f, size 0 (0 KB)
  

  MMAP_VIDEO_0_BASE = 0x8c2012, size 0x2081d88 (33288 KB)
  

  MMAP_MONO_BASE = 0x8c2015, size 0x5000000 (81920 KB)
  

  MMAP_SPU_BASE = 0xdc2012, size 0x500000 (5120 KB)
  

  MMAP_VIDEO_2_BASE = 0x12c2012, size 0x500000 (5120 KB)
  

  MMAP_VIDEO_3_BASE = 0x17c2012, size 0x500000 (5120 KB)
  

  MMAP_VIDEO_4_BASE = 0x1cc2012, size 0x500000 (5120 KB)
  

  MMAP_VIDEO_1_BASE = 0x2943d9a, size 0x12c8000 (19232 KB)
  

  MMAP_MONO_EXT_BASE = 0x58c2015, size 0 (0 KB)
  

  (*) DirectFB/Graphics: SMP863x Software Rasterizer 0.1 (Sigma Designs)
  

  (!) SMP863x: Error: could not open persistent HDCP SRM file: /mnt/sigma/hdcp.srm
  

  (!) Current pixel clock at digital output: 27000000 Hz
  

  (*)   HDMI output is missing.  VXP OSD is switching to component output.
  

  (*) Display params: -no_cp  -digital -hdmi_spd SDesigns BluRay_SMP8654 -f HDMI_1080i59 -cs yuv_709 -asp 16 9 -hdmi 1 -component -f 1080i59 -cs yuv_709 -asp 16 9 -analog -f NTSC_M -cs yuv_601 -asp 16 9
  

  (*) uses_vxp=0, sglobals=4407464, action=1, want=1, natStd=64, custom=0
  

  (*) NOT setting up VXP scaler!
  

  (*) VXP scaler: discarding previous HDMI resolution.
  

  (*) Setting up SMP outputs with apply_outports_options()
  

  (!!!)  *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Parameters don't match any configuration; using defaults !
  

  ] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
  

  (!!!)  *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Parameters don't match any configuration; using defaults !
  

  ] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
  

  (*) SMP863x: HDMI Checker Thread running (pid=1087)
  

  (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
  

  (*) SMP863x: Output Reconfiguration Thread running (pid=1087)
  

  ir: exclusive access only
  

  (!) DirectFB/em86remote: IR device /dev/ir could not be opened, retry in 1 second
  

  --> Input/output error
  

  (!!!)  *** WARNING [letting unprivileged IDirectFBDisplayLayer::GetSurface() call pass until cooperative level handling is finished] *** [src/display/idirectfbdisplaylayer.c:173 in IDirectFBDisplayLayer_GetSurface()]
  

  Device: Software Rasterizer (SMP863x), Driver: EM86xx Driver v0.1 (Sigma Designs) Pixelformat: 4 (5)
  

  acceleration: 0x70001
  

  blit: 0xb
  

  draw: 0x1
  

  video: 0KB
  

  

  (*) Direct/Thread: Running 'EventBufferFeed' (MESSAGING, 1095)...
  

  (*) Direct/Thread: Running 'EventBufferFeed' (MESSAGING, 1096)...
  

  Cpu0[textedit:1087:0x2b756ab4:0x004988c1] fix-ups done.
  

  Cpu0[textedit:1087:0x2b76090c:0x004988c5] fix-ups done.
  

  Cpu0[textedit:1087:0x2b76ce04:0x004988c9] fix-ups done.
  

  Cpu0[textedit:1087:0x2b754e44:0x004988e9] fix-ups done.
  

  Cpu0[textedit:1087:0x2b756ab4:0x0048f571] fix-ups done.
  

  ir: exclusive access only
  

  (!) DirectFB/em86remote: IR device /dev/ir could not be opened, retry in 1 second
  

  --> Input/output error
  

  (!) [ 1087:    0.000] --> Caught signal 11 (at (nil), invalid address) <--
  

  (*) Display params: -analog -f NTSC_M
  

  (*) uses_vxp=0, sglobals=4407464, action=0, want=1, natStd=64, custom=0
  

  (*) NOT setting up VXP scaler!
  

  (*) VXP scaler: discarding previous HDMI resolution.
  

  (*) Setting up SMP outputs with apply_outports_options()
  

  [HDMI] Updating HDMI until TMDS is off.
  

  [HDMI] TMDS is now off.
  

  (*) SMP863x: Closing HDMI chip 1
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #0 address 0x9f3fbe34 with refcount 1 > 0 do not free
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #1 address 0x9f3b9e28 with refcount 1 > 0 do not free
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:317] emergency_exit: #2 address 0x9f294e1c with refcount 1 > 0 do not free
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:325] emergency_exit: freeing entry 3, address 0x9ef1037c.
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:325] emergency_exit: freeing entry 4, address 0x9ef0ff6c.
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:325] emergency_exit: freeing entry 5, address 0x9e64db5c.
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1395] EMhwlibUnregisterCleanable mem_area (0x8afd9c90): not found
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:325] emergency_exit: freeing entry 6, address 0x9864d750.
  

  em8xxx0 [/opt/smp8654/yaffs/mrua_SMP8654F_3_11_0_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:998] em8xxx_release: unclean exit (4 entries)
  

  Segmentation fault